Ellusia Studio

Kelvin does not mean brightness

Kelvins, lumens, lux and watts answer different questions. Knowing which is which makes a lighting specification much easier to read.. Kelvins describe the warm

Four numbers, four different questions

Kelvins describe the warm-to-cool appearance of white light. Lumens describe the total visible light output. Lux describes the illumination arriving at a surface: one lumen spread over one square metre corresponds to one lux.

Watts describe electrical power, not the amount of useful light reaching your book or table. Comparing wattages alone can be misleading when the lamps use different technologies or have different optical designs.

A higher Kelvin value is not a higher setting

A 4000 K source is not automatically brighter than a 2700 K source. If two sources deliver the same lumens, their overall light output is the same by that measure, even though their appearance differs.

The light reaching a particular task can still differ. A narrow beam concentrates output; a broad diffuser spreads it. Position, distance, shades and the reflectance of the room affect the result.

Read a specification in the right order

First ask what the lamp needs to do: illuminate a work surface, create atmosphere or reveal a sculptural surface. Then check colour temperature, output, distribution and control separately.

For integrated lighting, check whether a lumen figure describes the LED module or the complete luminaire. A diffuser and housing can change the delivered output. Ask for clarification instead of comparing unlike figures.

A simple takeaway

Use K for the appearance of white light, lm for output, lx for light on a surface and W for power. None of these numbers replaces a look at the lamp in its intended setting.

Further reading

https://www.energy.gov/cmei/femp/purchasing-energy-efficient-light-bulbs

https://www.energyrating.gov.au/consumer-information/products/lighting/choosing-right-lamp

https://www.eia.gov/todayinenergy/detail.php?id=18671